In our garage. Not at your door.

Our ceramic coatings come to you. Tinting does not. Film needs a clean, climate-controlled bay to go on right, so every tint job happens at our Port Charlotte garage.

Not a mobile service.

Unlike our ceramic and detailing work, window tinting is done only at our climate-controlled garage in Port Charlotte, FL. Drop your vehicle off in the morning and pick it up in the evening.

  • Climate-controlled garagePort Charlotte, Florida. Dust-free, temperature-stable bay.
  • Drop off in the morningWe'll confirm the window when we book you in.
  • Pick up in the eveningSame day. Film goes on, cures in the bay, and you drive home.
Dark grey sedan with freshly tinted side and rear windows inside a dim detailing garage, bay door open to a Florida dusk
The bay · Port Charlotte

Good, better, best.

Every film we install is a real step up from the cheap dyed and basic carbon tint most shops start with. Pick how far you want to go.

Good

Carbon IR

Our premium budget option. A step above the dyed and basic carbon film competitors sell as standard.

  • Carbon infused with ceramic
  • Better durability than plain carbon
  • More UV protection
  • Darkens the cabin and rejects heat
Lifetime warranty
Better

Ceramic

Real heat rejection. Ceramic film insulates the glass itself, so the cabin stays noticeably cooler parked and in traffic.

  • Heat rejection
  • Insulation for the glass
  • Darker cabin, cooler ride
  • UV protection
Lifetime warranty
Best

Premium Ceramic

Our top-tier film. Everything the ceramic does, at its best, for owners who want the coolest, most protected cabin we offer.

  • Top-tier ceramic construction
  • Heat rejection and glass insulation
  • Darker cabin, cooler ride
  • UV protection
Top tier · Lifetime warranty

Every piece of glass.

Tint the whole car or just the glass that matters to you. We'll walk the vehicle with you before any film is cut.

  • Driver-side door windows in dark tint, gold light along the window line
    Side windowsFront and rear doors, plus any quarter glass.
  • Tinted rear window with faint defroster lines above the tail lights
    Rear glassBack window, including defroster-line glass.
  • Windshield with a light, nearly clear film, dashboard visible through the glass
    WindshieldLight, nearly invisible film for heat and UV.
  • Dark tinted strip across the top of a windshield above clear glass
    Windshield browA visor strip across the top of the windshield.

Questions before you tint.

Straight answers on Florida tint law, film and heat. The sun here is not a rumor, and cheap film gives up fast on the Suncoast.

Florida law

It depends on the window. Florida sets a minimum visible light transmission (VLT) for each one:

Front side windows28% and lighter
Rear side windows and back glass15% and lighter6% on truck-chassis SUVs and trucks
WindshieldStrip above AS-1No full-windshield dark tint

We'll recommend a legal shade for your vehicle and window.

Only with a medical exemption. The standard legal option is a transparent visor strip across the top of the windshield, above the AS-1 line.

Our 70% windshield film blocks a ton of heat with almost no change in look, and it's best in ceramic. In Florida, film across the full windshield requires a medical exemption certificate. Medical exemptions honored.

Visible light transmission: the percentage of light that gets through the window, measured with the film on the glass. The lower the number, the darker the window, so 15% is darker than 28%.

Film & heat

In Florida sun, basic dyed film starts fading within about three to four months. The films we install are chosen for heat, UV and years of daily sun, not for the price tag. Ours doesn't fade, and it's warrantied for life.

Carbon IR is carbon infused with ceramic. It gives you the look and real heat rejection, with more durability and UV protection than plain carbon.

Ceramic goes a step further: a darker cabin plus insulation for the glass itself.

Yes. Cooler glass means a cabin that's noticeably cooler when the car has been parked and in traffic. It cools down sooner and stays there, so the AC isn't fighting the sun all summer.

Every film we install blocks UV. Less sun on the seats means leather that doesn't crack or fade, and a dash that keeps its color.

Every film we install comes with a lifetime warranty. That's the floor, not the upsell.

Clean glass, or nothing sticks.

Same rule as our coatings: the film is only as good as the prep beneath it. Every window goes through the same steps, in the same bay.

  1. Step 1: Clean

    Glass is cleaned inside and out, and old film, if any, is stripped before we start.

  2. Step 2: Strip

    Old oils, adhesive and residue are removed so the film bonds to bare, clean glass, not to what was on it.

  3. Step 3: Cut and shape

    Film is cut to the window and heat-shaped to the curve of the glass for an edge-to-edge fit.

  4. Step 4: Install and cure

    Applied wet, squeegeed to a bubble-free finish, then left to cure in the bay. Keep the windows up for a few days after.

Close-up of a freshly installed dark window tint edge sitting flush against a black window seal
Edge detail

5+ years in paint protection.

Five-plus years of experience in the automotive paint-protection industry, and the same standards for a window as for a coated panel.

Quoted per vehicle.

Film, number of windows and glass shape all change the job, so we price each vehicle on its own. No menu prices, no surprises.

Get on the list. Request a quote.

Tinting opens at our Port Charlotte garage soon. Call or email with your year, make and model and which glass you want done, and we'll quote it and hold you a spot.

Or write to Suncoastprotection@gmail.com

  • Family shop since 2019
  • Lifetime warranty on every film
  • Legal shade for every window
  • Port Charlotte, FL garage